---

Bobst M1 Vision 430 (2020)

---

Wiek: 2020
Max.Size: 43 x 0 cm (16 x 0 inch)

---

Opis techniczny:

BOBST M1 VISION 430 10k year 2020
Vision M1 - UV flexo rotary press
Base Machine Description
Mechanical drive on printing units and servo drive on die cutting stations
Includes:
Front load unwinder with motorized roll lifting
Unwinder with magnetic particle clutch (max. reel diameter 1.000 mm.)
BST Automatic Web Guide
BST Powerscope web viewing system with manual camera movement
Infeed unit
2 Die-cutting stations (male-female die-cutting possible)
Servo driven die-cutting units (1 servo motor per unit)
Waste matrix rewinder up to 700 mm diameter
Crush cutting slitting system including 3 blades
Back slitting unit for silicon paper (half cut) Includes 2 crush knives
Outfeed unit
Vario™ - Servo driven outfeed (includes active load cell)
Organizer (includes crane to remove and store die-cutting tools)
3 Web break detectors (2 for main web, 1 for matrix web)
Motorized rewinder (max. reel diameter 1.000 mm.)
Local touch screen panel on each printing and die-cutting station
Main touch screen panel (PC HMI)
Direct Internet Connection for remote SW and HW service and upgrades
Flexo Printing Unit Description
(Mechanical drive with rigid transmission for the printing units)
Includes:
1000 mm base platforms (for up to 2 Flower™ flexographic heads)
Flower™ flexographic heads
Short web path
Plexiglass cover for printing unit
GEW UV curing system with E2C 140W/cm lamps and RLT electronic power supply. (Include main touch screen panel)
Printing accessories:
1 set of rubber rollers per color 3 additional pcs.
1 set of ink trays per color 3 additional pcs.
1 set of doctor blade holders per color 3 additional pcs.
SnowBall™Lite: The system is based on a rewind architecture which obliges the waste to rewind on a fixed point, to create a stable and reliable build-up of a “snow-ball” of waste matrix. The system includes : waste rewind stripping device, on linear horizontal guides, (includes rewind motors) pressure pneumatic cylinder and pneumatic shaft. Maximum waste reel diameter mm. 700.
LaserSet™ Pre-register system through the use of a laser pointer which guides the operator to the correct angular position of the print cylinder as indicated by the local touch screen panel.
The use of this feature requires print cylinders with numbered ring.
10 colors
Temperature and Tension Control
Bobst recommends chilled drums for press configuration over 8 print units
Vario : Infeed unit driven by servo motor


Chilled drum (excluding pipes and chilling unit) - Installed in lower position
Max 2 units (before die-cutting and/or mid press) can be selected.
Chilling Unit for up to 8 chill drums
Die-cutting and matrix removal
Additional blade for crush cutting or for back slitting
Rail system for accessories
Upper rail for 2 printing units module
Eg. Select 4 for 7 or 8 color press.
Combo Laminator (unwinder and rewinder) and Cold Foil kit on RAIL
Peristaltic ink pump- 1 pc.
Additional ink tray with rubber roller and doctor blade holder - 3 pcs.
Corona treaters:
Vetaphone 3 kW; DG 30 fan; 6 bars single side head (application frame and installation included)
Web Cleaners:
ACE double side (non-contact type)
Printing cylinders
Z90 - 10 pcs.
Z98 - 10 pcs.
Z128 - 10 pcs.

Magnetic cylinders
Z90 - 1 pc.
Z98 - 1 pc.
Z128 - 1 pc.

Aniloxes - 10 pcs.

470/2B
320/4A
250/6B
200/7B
160/8C
180/8
420/2
440/3,8
420/3,5
420/3,5E

---

Lokalizacja: Europe Eastern

---

---

Dostepny: Immediately

---

---

---

---

---

Send Email

Save

---

---

---

---